| www.rsssrocksbc.com Call Rod Roth (250) 464-9991 100 Slater Road Northwest Cranbrook BC map |
- dump truck - sold. 21 foot Box, Hoist and Controls also sold
- Light weight Custom Aluminum 21' dump box , 30 cubic yards
- 60" tall tailgate with grain chute
- Air power tailgate latch
- Air power tarp arm & Spring roll
- New .75" thick Plate Alu. Floor welded in for strength & durability
- LED Lighting,& wiring harness, DOT red/white reflective tape
- included 50Ton hoist no leaks
Call Rod Roth (250) 464-9991
email rod@rsssrocksbc.com
email rod@rsssrocksbc.com
95 Dodge 12Valve Cummins puller, 1150lbs torque@2700, 485
rear wheel HP !
rear wheel HP !
- 2000 - 2003 Ontario reigning street stock puller champion- 300 foot pulls
- drive-shaft hoops, SFI flywheel, Van-Haisly competition puller twin disk
clutch, Rancho 5000 adjustable shocks, 6500lbs, ladder-bars - engine balanced, two custom cams, O-ringed head, race ported, 2"
stainless headers single 2.800 turbo, 5 inch exhaust, Gale Banks Power-
pack, PDR race P-pump and injectors, KDP fixed, 4200rpm gov. - BC safety inspection, trailer hitch, fifth wheel, street legal and muffler
Used Plastic totes for sale, not washed, excellent condition
- stored with environmentally friendly bio-diesel, non harmful
- skid-mount, caps valves all in good working order
- we still have three of them for sale,
$175.00 Each
Tamper-proof steel restaurant wvo collection tanks skid mount
- 4 tanks measure 5feet x 5feet x 30inches , 1200 Litres. -All SOLD
- 5 tanks measure 4feet x 5feet x 30 inches 960 Litres - two left
- fork lift skids welded below
- plastic lids and padlocks
- new 3 years ago, some need paint
- internal hot water pre-heating coils
Skid Mount Full Vacuum Sucker tank
- 950 Litre Vacuum / 160psi pressure tank
- 60,000 Btu propane burner
- condensation tank
- Honda 5 hp unit is SOLD
- 35 gpm high vacuum pump
- 20 feet discharge and suction hose
- suitable for the back of a pick-up truck
camera shy! |
316L FV Stainless Steel 2292 LTRS- Carlsberg Breweries
Copenhagen - vessel, beer fermentation tank, cold water jacket is mfg of
mild steel and has been removed from upper half, lower cold water jacket is in
poor condition, appears to be dented and rusting. The lower jacketing has heavy
fork lift slots for moving unit. Lower 2 inch side outlet valve is fed from long slot
tapered drain that covers the bottom 16 inches of tank, Upper man cover is 18
inch diameter housing top fill pipe - 2 inch stainless.
Working pressure is 4kg/cm2 = (56.89PSI).
Trial pressure 5.2kg/cm2 = (73.96PSI). Over-all tank condition is great with a few
light dents. Very clean inside. 66 inches diameter, 12 inch dish top, 12 inch dish
bottom, 24 inch tall sides, over all height is 4 feet.
MFG. WILHELM SCHMIDOING KOLN 1961 For Sale $9,100.00
Copenhagen - vessel, beer fermentation tank, cold water jacket is mfg of
mild steel and has been removed from upper half, lower cold water jacket is in
poor condition, appears to be dented and rusting. The lower jacketing has heavy
fork lift slots for moving unit. Lower 2 inch side outlet valve is fed from long slot
tapered drain that covers the bottom 16 inches of tank, Upper man cover is 18
inch diameter housing top fill pipe - 2 inch stainless.
Working pressure is 4kg/cm2 = (56.89PSI).
Trial pressure 5.2kg/cm2 = (73.96PSI). Over-all tank condition is great with a few
light dents. Very clean inside. 66 inches diameter, 12 inch dish top, 12 inch dish
bottom, 24 inch tall sides, over all height is 4 feet.
MFG. WILHELM SCHMIDOING KOLN 1961 For Sale $9,100.00
camera shy! |